NATIVE AMERICAN ART
View "Native American" Art Pages 1 2 3 4 5 6 7 Next>
Page 2 of 7
ES1181-T "Native American Dancer #1" is stamped on white card
stock, colored with pencils, cut out and attached to a piece of brown handmade
paper which has been
water torn on the edges. A piece of Urban Metal (gold) paper is layered on
black card stock and the
stamped piece is then layered on the Urban Metal paper. Eyelets, fiber and
beads are attached as
shown. Card stock is available from Yellow Rose Art Stamps and the card is made
by Wendy Kerr.
ES1183-L "Native American Dancer #3" and
ES1184-L "Native American Dancer #4" are
stamped on matte coated card stock and colored with markers. The desert
scene is printed onto paper, trimmed and layered onto Genesis Fossil
card stock and Genesis Cypress card stock. Holes are punched through the
card and dancers, then attached to the card with a brass brad. Card stock
is available from Yellow Rose Art Stamps and the card is made by Wendy Kerr.
ES1182-P, "Native American dancer #2" is stamped on white card
stock, colored with pencils and cut out. It is then
layered on Urban Metal paper and black card stock.
A scrap of metal paper is run through the Xyron machine
close enough to the edge so that the "wheel"
of the machine runs over the paper rippling the edge.
Adhesive is applied to the back of this piece.
It is then adhered over three groups of feathers and
attached to the center of the (Genesis Cypress)
card stock which barely shows here because of the black
background. The dancer is then attached to
the center of the card. Card stock is available from
Yellow Rose Art Stamps and the card is made by
Wendy Kerr.
JA493-K "Zuni pot, Lg." is heat embossed on three different colors
of velvet, cut out and mounted on foam dots over hand made
paper that is layered on burgundy card
stock. Card by Patty Tamler.
JAMW965-P "Zuni bear fetish lg.", is embossed in verdigris, cut out and
mounted on tan parchment card stock which has been stamped
once with MW722-A "Return symbol,
Sm." and once with
MW723-B "Return symbol, Lg.".
MW721-B "Sunburst, Sm." is stamped as a
border with 2 lines drawn between each image. The card
is finished by being layered on tan card
stock. Card by Margaret Wiggin.
JAMW871-K "Kokopelli #8 Med." is stamped with a black Brilliance
stamp pad three times and cut out. MC1172-U
"SW Indian
blanket background" is embossed with
copper embossing powder and layered over rust confetti
card stock. The 3 kokopelli's are attached
with mounting tape. Card by Margaret Wiggin.
857-R "Navajo design" is stamped with tinted top boss emb. pwdr. and
embossed with a rust embossing powder on white card stock,
then colored with markers and cut
out. The center of the design is cut out and placed over
a stamped and colored head of 839-G
"Hopi Kachina #1, Sm.". The Hopi Kachina is then stamped,
colored , cut out and placed with
mounting tape in the lower right corner of the card after
the card is layered with black linen card
stock and cocoa colored card stock. Feathers are placed
in the top left corner under the Navajo
design. This card, made jointly by Pamela Hewitt and
Margaret Wiggin, was one of those cards
that took all evening to make and was so-o-o much fun to
do!
JA402-F "Mimbreno animal",
JA403-F
"Mimbreno ant lion" and
JA406-G "Mimbreno turkey # 1" are stamped in black memories
inside an asymmetrical grid that
has been prepared by cutting light colored card stock with
deckle edge scissors, putting "wonder"
tape on the card stock in an asymmetrical pattern and
laying copper foil over the tape. Card by
Kirsten Krause.
JA411-F "Mimbreno horned toad" is stamped three times, embossed in
gold on black card stock , cut out and layered on
turquoise paper which has been layered on black
card stock with gold embossed dots bordering it. This is
then layered onto background paper.
The final layer is dark blue card stock. Card by Danielle
Côté.
JA493-K
"Zuni pot. Lg." was stamped with a black memories pad on
multicolored "leaf" which had been applied to a square
piece of card stock . That was then layered
onto black card stock which was layered on copper card
stock which had been trimmed with
decorative scissors and layered on another piece of black
card stock. The final layer is gold card
stock. A border made with fine metallic cord has been
formed on one of the black layers. Card by
Danielle Côté.
857-R "Navajo design",
862-J "Navajo blanket # 1",
864-I "Navajo
blanket # 3", 861-H
"Navajo blanket # 8", and 860-H
"Navajo blanket # 7 were embossed with
copper emb. pwdr. on black card stock and cut out. One
image was stamped with "862-J Navajo
blanket # 1" on confetti kaleidoscope card stock with
black memories ink. The confetti card stock
was then layered on black card stock. A feather was
placed in the center of the Navajo design
and all cut-outs were glued on the confetti card stock and
some placed so as to overlap each other
and to overlap the black background layer, also. Card by
Margaret Wiggin.
Page 2 of 7
View "Native American" Art Pages 1 2 3 4 5 6 7 Next>
Home
Copyright Stamps Galore 1994